BAMC New KHF-10 High Flow Oxygen Therapy

Advantages:

>Compared with the traditional oxygen therapy, the optimum humidity oxygen supply can be controlled.

>Easy to use and tolerate, and supply flow and oxygen concentration without any influence.

>When the patient was removed or changed, the treatment was variable and continuous.

>The interface is smaller and does not require a variety of devices and treatment interface switching.promote oxygenation, reduce WOB.

>Improve airway mucosal clearance, more comfortable.

>Reduce the dead space of the pharynx and provide low level positive pressure.

>Get the same effect as low level CPAP.

 

Consist of:

Air-oxygen blender;

Chamber with heated;

Breathing circuit with heated wire;

Nasal prong.

Choose to match: medical air compressor.

 

Technical parameter:

>Air-oxygen blender (AD3000-SPA)

Origin India

 

»FiO2	21%~100%	»alarm noise	>57dB(A)
»Folw	0~18LPM	»pressure of air       and oxygen	0.3MPa~0.4MPa
»gas-source             interrupted	audible alarm	»measurement of     main machine	6.8*6.8*7.5cm
»pressure difference	Pressure difference more   than 0.1MPa, audible       alarm	»weight	About 1.6kg
»alarm time	> 60s	»certificate	EN ISO 13485

 

>PN-2000FB humidifier

 

»temperature	Mode with Heated wire:          25ºC~39ºC	»Max-temp of          heating appliance	<85ºC
	Mode without heated    wire: 23ºC~37ºC	»thermal cutoff of heating  plate	120±5ºC
»maximum water        capacity	230mL	»operating ambient       temperature	18ºC~26ºC
»working pressure	≤2kPa	»display window flashing	patient distal               temperature>40ºC
»flow	180L/min	»H	patient distal               temperature≥50ºC
»drop of pressure	<300Pa	»L	patient distal               temperature≤10ºC
»power supply	220VAC 50Hz	»ER2	heating plate sensor    failure or off
»power              consumption	150W	»ER3	heating plate sensor    failure or off
»volume	135mm*145mm*155mm	»weight	3.2kg